Jump to content
Battlefront is now Slitherine ×

Never too late


Recommended Posts

Hello, I'm an old CM player(Saturnin). By nostalgia  I make a little comeback with CMFI (i lost my old accunt, dead mail adress). To celebrate this I offer a small Mod.
I hope it will please you.
Here is the sdkfz250-1. I wanted it with more battle dress looking
It comes with: 2 camos, random material and options (hatch open or not, ...) a multitude of possibilities to test.
For that it is simple.
If you want the two camouflages leave as such.
If you want one in particular discard the one you don't want and rename the BMP file to: sdkfz250-1-hull.bmp
If you dont want  the stuff 3D it simple discard the ALL .dmr file
Many thanks to Aquila-SmartWargames and
sbobovyc for the lesson of 3d  and all their work.
That's great
As a small supplement I also made Protze. Because without Protze life is not the same :)
I will finish the series of 250 / ... I think and may be the 251 / ...
See you soon
Have fun
Satomas aka Saturnin

 

aedbk.jpg

XLVXl.jpg

2AEO9.jpg

8DbpG.jpg

y4qwv.jpg

For the moment I have not found a solution with Cmmods. I go through dropbox until the solution

https://www.dropbox.com/s/vxwhi4ss3y8834t/sdkfz%20250%201.zip?dl=0 for the 250/1

https://www.dropbox.com/s/yq0oi125gxoy3oa/ProtzV1.2.zip?dl=0  for the Protze

A bientôt

Link to comment
Share on other sites

That is quite well done. Additional stowage chaos is always good and seems appropriate to human behaviors and mess.

Is the stowage a different model, I can't recall?- which would be great, as variation would be built in. If not-

I'm not sure where the texture for the helmet came from, but you could add additional elements and alpha channel them out for stowage variation. In other words, you have three helmets lined up. The texture for one halftrack shows all three helmets. The next variation would alpha out the middle helmet (for example). The last texture removes one of the outside helmets (for example).

Link to comment
Share on other sites

14 hours ago, Satomas said:

Here is the sdkfz250-1. I wanted it with more battle dress looking

As a small supplement I also made Protze. Because without Protze life is not the same :)

I will finish the series of 250 / ... I think and may be the 251 / ...  

+1.  Thank you.  Very nice work. 

Link to comment
Share on other sites

it's great
just one request
if you put only german equipment it will work with all CM ww2
but the pm berretta and the italian cartridge belt prevents it from being used with the other CM
which is a shame because it really gives a good touch of realism  and i need it to CM Normandy
great job Bravo

Edited by Falaise
Link to comment
Share on other sites

Arggggh NOoooo....

First thank you all for your feedback and advice.

A big thank you for the Aquila-SmartWargames video and I note Falaise for the German material and the other CMwwII. I will try to reinstall Cm normandy (if I understood everything correctly of install).
 

But for

Quote

I don't see the crew and the passegers of the 250 (they are outside of the map) and when it moves the carriage vanishes (only the tracks are still visible)...


I have no solution for the moment...I am sorry, exuse me 

Everything was good yesterday and today ....... with me  it does too. I will try to see this later

Aquila do you have any idea what is wrong with ? 

Link to comment
Share on other sites

I don´t think its the mounting points. There is a interference when using this method when loading multiple vehicles into the same Blender application instance. No matter if recent items are present or not it might attach those x.001 x.002 extensions to model parts which can cause issues.

Good news is that it shouldn´t be hard to recover it, let me see if it can be done. 

Edited by Aquila-SmartWargames
Link to comment
Share on other sites

I identified two issues:

1) metadata checkmark was missed upon import or export (wheels/tracks disappear or behave strange)

2) the already mentioned naming extension mechanism of Blender (vehicle functions cease to work properly)

I used this to make a tutorial video in how to identify, prevent this issues and on how to recover bugged projects with minimal lost work

 

Edited by Aquila-SmartWargames
Link to comment
Share on other sites

Hello,
here is the second
It comes with two camos which are random. if you don't want them :remove it and rename the file.
For the 3d model  if you don't like just remove the .mdr file
The 250-3 is quite rare, you will find it inTanks as an observer.
I will surely use camo for the 250/10 because I like it :) and it will not be really used.
You can also use the camo for the 250/1 by renaming the files
Thank you again for the remarks that I took into account (German material ...)

5yYYy.png

rGJJe.png

[![Image](https://i.goopics.net/1y00e.png)](https://goopics.net/i/1y00e)

...i came with a big supplement (it took me time)
The Flak 36 with 3 camos:
One: freshly landed in Sicily from AfrikaKorps
+ the same but with a hasty camo + a vanilla version of CMBN rework. For the 3d i have an idea
The flak At are not posed at random in the plain. They are  a small defense post. I tried to reproduce this and I managed to get around the problem of elevating the terrain by a little trick.
Please give me your opinion to know if it's interesting that I continue on this track and on the other flak.

mV00P.png

KJ223.png

j8ooe.png

 

 

for the 250/3

https://www.dropbox.com/s/ib700amh7zghoqh/250_3jpload.zip?dl=0

for the Flak36

https://www.dropbox.com/s/rek7l5hpzbz2tiv/flak36load.zip?dl=0

See you very soon for the 250/10

PS : I have a question I can't find the 250/7 in Game
 Someone tell me or and where is it available ?

Satomas aka Saturnin

 

Edited by Satomas
Link dont work
Link to comment
Share on other sites

7 hours ago, Satomas said:

PS : I have a question I can't find the 250/7 in Game
 Someone tell me or and where is it available ?

I didn´t look through everything but at least the Panzer Aufklärung Batallion 44 has them. Under the formation options select for medium mortar "on map" and then you should see the option mortar halftrack with 250/7 (alt) and (neu).

Link to comment
Share on other sites

Hello,
here is the rest as expected
There are a lot of things and a lot of options and random stuff.

- For the 250-7 no change for the .mdr. 1 camo (I don't think he needs it.)
The 250-10 has Italian material. I will make a CmBN compatible version very soon. (he has 2 camos, random stuff)
The 250-9 with 2 camo of your choice and random stuff

I add to the deck the opel blitz with lot of option also it is not compatible with CMBN (I will also do it very soon).
I removed the triangle on the roof (for aesthetics). He has two camos and random stuff with it have no cover
I also made the sdkfz233 with two camos and lots of options


I am never satisfied with my skins and I would always like to refine them but you have to do the work.
Maybe I'll come back to it one day. The vanilla skins are very good . A good weathering do the job i think
I come back in 2 hours to finish the post and put the dowload links.

LKl7d.png

LKl7d.png

rGlNj.png

j8L3r.png

7D87N.png

ADvWw.png

1ydpw.png

i made a trick to fix a bug with soldier in truck ;)

[![Image](https://i.goopics.net/RJ9Ew.png)](https://goopics.net/i/RJ9Ew)

mV1Gm.png

KJQjm.png

A tt

Link to comment
Share on other sites

Here the link sdkfz 251-7-9-10

https://www.dropbox.com/s/bmwaospw8uh9mo5/sdkfz250-7-9-10_sat.zip?dl=0

Opel blitz (it's more funky)

https://www.dropbox.com/s/ciw5c0nw7ml7i48/Opel Blitz_sat.zip?dl=0

sdkfz 233 (now it s more badass)

https://www.dropbox.com/s/2kj0z41s5ssvdum/sdkfz233_sat.zip?dl=0

See your for the sdkfz 231soon and  i ll see between  250 neu serie for finish the aufklarung or 251 serie

Have fun guys !

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...