kohlenklau Posted May 2, 2021 Author Share Posted May 2, 2021 @umlaut Hi! Are you interested to make some vehicle mods for this project? I have a few ideas. If you have the time and the interest...if not, I understand. Even as the new Aris, you gotta enjoy these games once in a while. Best wishes! Thank you Dennis! 0 Quote Link to comment Share on other sites More sharing options...
umlaut Posted May 2, 2021 Share Posted May 2, 2021 (edited) 9 minutes ago, kohlenklau said: @umlaut Hi! Are you interested to make some vehicle mods for this project? I have a few ideas. If you have the time and the interest...if not, I understand. Even as the new Aris, you gotta enjoy these games once in a while. Best wishes! Thank you Dennis! The new Aris is one thing I am sure I´ll never be. I have no idea how he managed to spew out so many mods so fast. I´d rather not promise anything - but please let me know what´s on your mind. By the way: Could you please check if you are experiencing the same save strangeness as me? Edited May 2, 2021 by umlaut 0 Quote Link to comment Share on other sites More sharing options...
kohlenklau Posted May 6, 2021 Author Share Posted May 6, 2021 The secret Nazi MEGALON glider could carry an entire company! 4 Quote Link to comment Share on other sites More sharing options...
mjkerner Posted May 6, 2021 Share Posted May 6, 2021 Lol, keep at it, Phil! If you run it through the dryer on high heat, it should shrink a bit. You are going to conquer Blender yet! 1 Quote Link to comment Share on other sites More sharing options...
kohlenklau Posted May 6, 2021 Author Share Posted May 6, 2021 3 minutes ago, mjkerner said: Lol, keep at it, Phil! If you run it through the dryer on high heat, it should shrink a bit. You are going to conquer Blender yet! Hahaha, yeah. I asked my Coach to tell me the easiest way to scale it to the CM world...standby. I have the bmp art ready to go and we shall see in a few days how it looks in game... ..and I will rotate it about the x-axis to have a wingtip touch the ground. If I take a couple modder's viagra pills, I will probably TRY to swing open the cockpit glass! 1 Quote Link to comment Share on other sites More sharing options...
JM Stuff Posted May 6, 2021 Share Posted May 6, 2021 Very nice Job Phill impressive, a question why you dont took the ju 52 ? I think will be more appropriated for Creta, Just asking ? JM 0 Quote Link to comment Share on other sites More sharing options...
kohlenklau Posted May 6, 2021 Author Share Posted May 6, 2021 49 minutes ago, JM Stuff said: Very nice Job Phill impressive, a question why you dont took the ju 52 ? I think will be more appropriated for Creta, Just asking ? JM I want to introduce the Ju-52 but it is a lot of work. maybe too much work for the results I can obtain. We'll see after I do the glider... 0 Quote Link to comment Share on other sites More sharing options...
JM Stuff Posted May 6, 2021 Share Posted May 6, 2021 41 minutes ago, kohlenklau said: I want to introduce the Ju-52 but it is a lot of work. maybe too much work for the results I can obtain. We'll see after I do the glider... Don't worry good job looking good Phill this was only an Idea ! 0 Quote Link to comment Share on other sites More sharing options...
kohlenklau Posted May 6, 2021 Author Share Posted May 6, 2021 The glider was from an "stl file" which is used for 3D printing <for tabletop wargamers in this case...> 0 Quote Link to comment Share on other sites More sharing options...
Vacillator Posted May 6, 2021 Share Posted May 6, 2021 Can I just offer up some enthusiasm for everything here? You guys are all doing great work and it's much appreciated. I it a lot. 1 Quote Link to comment Share on other sites More sharing options...
JM Stuff Posted May 6, 2021 Share Posted May 6, 2021 You will not believe some helmets are also stl files! 0 Quote Link to comment Share on other sites More sharing options...
kohlenklau Posted May 7, 2021 Author Share Posted May 7, 2021 (edited) It has a lot of art work left to do...but it appears on the map! Acts like a flavor object... Edited May 7, 2021 by kohlenklau 0 Quote Link to comment Share on other sites More sharing options...
mjkerner Posted May 7, 2021 Share Posted May 7, 2021 I have been into metal miniatures for almost 50 years, but the last couple of years, 3D printing has taken off! You can get stl files for anything military. I don’t have a printer and have enough unpainted lead that my gaming room could double as a fallout shelter, so I don’t bother with them, but a quick web search will generate a lot of sites. Quite a few from among wargames are are free, too. 1 Quote Link to comment Share on other sites More sharing options...
Aragorn2002 Posted July 7, 2021 Share Posted July 7, 2021 How are things getting along, Phil? I'm still very interested in this project. 0 Quote Link to comment Share on other sites More sharing options...
kohlenklau Posted July 7, 2021 Author Share Posted July 7, 2021 4 hours ago, Aragorn2002 said: How are things getting along, Phil? I'm still very interested in this project. Thanks for asking! Coming along nicely. I have 3 scenarios done. Working last night on a 4th scenario. 1 more new scenario after that. uniform mods are almost done. 1 Quote Link to comment Share on other sites More sharing options...
Vacillator Posted July 7, 2021 Share Posted July 7, 2021 5 hours ago, Aragorn2002 said: I'm still very interested in this project. Me too, availale for more testing if it helps (okay, maybe I should just wait ). 0 Quote Link to comment Share on other sites More sharing options...
kohlenklau Posted July 7, 2021 Author Share Posted July 7, 2021 59 minutes ago, Vacilllator said: Me too, availale for more testing if it helps (okay, maybe I should just wait ). No worry Tim. You did your share already. 0 Quote Link to comment Share on other sites More sharing options...
mjkerner Posted July 7, 2021 Share Posted July 7, 2021 Phil is being a gentleman, as usual. It’s being delayed by me, I’m afraid. I bit off more than I should have considering a number of life factors. Plus my own mission creep. But in a week or 10 days, I’ll wrap up the uniforms. 1 Quote Link to comment Share on other sites More sharing options...
kohlenklau Posted July 7, 2021 Author Share Posted July 7, 2021 Just now, mjkerner said: Phil is being a gentleman, as usual. It’s being delayed by me, I’m afraid. I bit off more than I should have considering a number of life factors. Plus my own mission creep. But in a week or 10 days, I’ll wrap up the uniforms. No worry Mark! It is all good. 1 Quote Link to comment Share on other sites More sharing options...
Aragorn2002 Posted July 7, 2021 Share Posted July 7, 2021 2 hours ago, kohlenklau said: Thanks for asking! Coming along nicely. I have 3 scenarios done. Working last night on a 4th scenario. 1 more new scenario after that. uniform mods are almost done. Delighted to hear that! 0 Quote Link to comment Share on other sites More sharing options...
Aragorn2002 Posted July 7, 2021 Share Posted July 7, 2021 11 minutes ago, mjkerner said: Phil is being a gentleman, as usual. It’s being delayed by me, I’m afraid. I bit off more than I should have considering a number of life factors. Plus my own mission creep. But in a week or 10 days, I’ll wrap up the uniforms. No worries, MJ. Holiday is approaching, so take your time. 0 Quote Link to comment Share on other sites More sharing options...
mjkerner Posted July 7, 2021 Share Posted July 7, 2021 11 minutes ago, kohlenklau said: No worry Mark! It is all good. See, I told you he was a gentleman! 0 Quote Link to comment Share on other sites More sharing options...
Aragorn2002 Posted July 7, 2021 Share Posted July 7, 2021 1 minute ago, mjkerner said: See, I told you he was a gentleman! So are you. 0 Quote Link to comment Share on other sites More sharing options...
mjkerner Posted July 7, 2021 Share Posted July 7, 2021 Just to clarify, Phil hasn’t hassled or put pressure on me to move faster on this project. I am my own worst enemy for time-to-completing things…as you probably remember while waiting for those Goums, Aragorn. 0 Quote Link to comment Share on other sites More sharing options...
Aragorn2002 Posted July 7, 2021 Share Posted July 7, 2021 12 minutes ago, mjkerner said: Just to clarify, Phil hasn’t hassled or put pressure on me to move faster on this project. I am my own worst enemy for time-to-completing things…as you probably remember while waiting for those Goums, Aragorn. I remember they were very much worth waiting for. 0 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.