Aquilas-ESP Posted July 16, 2019 Share Posted July 16, 2019 Hello, When I select a mortar (infantry or vehicle) I don't know who order open fire to any position. When I select fire they shoot with their hand guns, when I select throw smoke they approach and throw it with their hands; I want to know who fire and throw smoke with the mortar. Thanks. 0 Quote Link to comment Share on other sites More sharing options...
The_MonkeyKing Posted July 16, 2019 Share Posted July 16, 2019 You have to "deploy weapon" first. After this you use target commands to order mortar to fire. You can also use fire observer to call in the mission just like off-map assets. 0 Quote Link to comment Share on other sites More sharing options...
domfluff Posted July 16, 2019 Share Posted July 16, 2019 Targeting directly with a deployed mortar also relies on the mortar having line of sight, to a certain extent. You can Target *just* out of LOS with a mortar, to the other side of a crest or hedge or whatever. Actual indirect fire requires a spotter with LOS to the target and the authority to call it in - Forward Observers certainly, but some armies devolve this down to low levels (in CMSF, US squad leaders can call in indirect fire, whereas Syrian squad leaders can not). 1 Quote Link to comment Share on other sites More sharing options...
Aquilas-ESP Posted July 16, 2019 Author Share Posted July 16, 2019 I did exactly what you told me, I checked it more thoroughly and it was that I was selecting a place too close, that's why they didn't shoot. Thanks of you both 0 Quote Link to comment Share on other sites More sharing options...
Andy_101 Posted July 24, 2020 Share Posted July 24, 2020 Hi, It always says my mechanised mortars are "not positioned" when I go to "available artillery". There is no option to "deploy weapon". Is there some other order I need to give them? 0 Quote Link to comment Share on other sites More sharing options...
Combatintman Posted July 24, 2020 Share Posted July 24, 2020 4 minutes ago, Andy_101 said: Hi, It always says my mechanised mortars are "not positioned" when I go to "available artillery". There is no option to "deploy weapon". Is there some other order I need to give them? Which units in particular mate? - I know back in the day, there was an issue with these being unable to fire using the indirect fire artillery dialogue, it might have crept back with the patch. A savegame will also be handy. 0 Quote Link to comment Share on other sites More sharing options...
Erwin Posted July 24, 2020 Share Posted July 24, 2020 Just checking... these are onmap mortars/artillery? One has to go to the mortar/artillery unit on the map and deploy it. (And then it has to have C2.) 0 Quote Link to comment Share on other sites More sharing options...
mjkerner Posted July 24, 2020 Share Posted July 24, 2020 4 hours ago, Andy_101 said: Hi, It always says my mechanised mortars are "not positioned" when I go to "available artillery". There is no option to "deploy weapon". Is there some other order I need to give them? Have you tried "Open Up" first? I haven't ever used mech mortars, but some other mechanized weapon systems require that order before they can fire. 0 Quote Link to comment Share on other sites More sharing options...
MikeyD Posted July 24, 2020 Share Posted July 24, 2020 Mortars have a minimum range as well as a maximum. If you're too close to the target they won't fire. Also, you don't have access to all the options when directly ordering them to fire. When you go through a forward observer, even if he's standing next to the mortar team, you get the ability to select target type, ammo type, duration, rate of fire, etc. 0 Quote Link to comment Share on other sites More sharing options...
Ultradave Posted July 24, 2020 Share Posted July 24, 2020 9 hours ago, Andy_101 said: Hi, It always says my mechanised mortars are "not positioned" when I go to "available artillery". There is no option to "deploy weapon". Is there some other order I need to give them? "Deploy Weapon" is the top left button in the "S" tab of action buttons when you select a unit. So let's say you have a mortar section in a vehicle of some kind. You have to dismount them, then click on the white dot at the end of the movement and select S/Deploy Weapon. Depending on the type of mortar, it should be ready to fire the next turn or the one after. Then it will show as available in the fire support tab. 0 Quote Link to comment Share on other sites More sharing options...
Andy_101 Posted August 2, 2020 Share Posted August 2, 2020 On 7/24/2020 at 9:13 PM, Ultradave said: "Deploy Weapon" is the top left button in the "S" tab of action buttons when you select a unit. So let's say you have a mortar section in a vehicle of some kind. You have to dismount them, then click on the white dot at the end of the movement and select S/Deploy Weapon. Depending on the type of mortar, it should be ready to fire the next turn or the one after. Then it will show as available in the fire support tab. Hi, thanks for all the responses. I'm a dunce! I had to dismount them first. I thought they were mobile vehicle mortars and could shoot straight from the vehicle. Thanks again for all the help! :) 1 Quote Link to comment Share on other sites More sharing options...
Combatintman Posted August 3, 2020 Share Posted August 3, 2020 22 hours ago, Andy_101 said: Hi, thanks for all the responses. I'm a dunce! I had to dismount them first. I thought they were mobile vehicle mortars and could shoot straight from the vehicle. Thanks again for all the help! No such thing as a dumb question mate - glad you worked it out. 0 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.