JoMac
Members-
Posts
2,261 -
Joined
-
Last visited
Everything posted by JoMac
-
I have noticed this through the years...There are occasions where a Gun Round would hit the top of Tank (where armor is thin by very slopped...upwards of 70-90 degrees perpendicular to round striking) and penetrate, rather then deflect off... Is the Gun Round just crashing through the thin but very slopped armor due to weight of shell alone (no possible deflection), even thou the rounds penetrator itself is barely hitting (if at all) the armor flush ? Here is one example below of PZIV with a penetration hit on top of Turret when engaging M4 Sherman at 700 meters (PZIV is facing slightly down hill). I also have had exact situations but with M5 Stuart w/37mm penetrating top of PZIV.
-
Ok, it does appear to be 'Moral Dependent' (among other combat factors) on how long it takes to become fully deployed...'Regulars' seem to take about 2 minutes, while 'Conscripts about 5 minutes. So, All is Well...
-
CMBN, v4.04... I deployed a Conscript 50mm AT from Truck and moved it at edge of Woods and using the 'Deploy Weapon', but for past few turns its still in Limbered Mode...I figured it would have deployed after couple turn at most. Haven't played with Field Pieces for a longtime so can't remember. Mortars seem to still deploy roughly on time, depending on Moral, etc. My Opponent is having same issue with his Conscript 57mm AT in Open Terrain in 'Deployment' mode for past few turns.
-
I know it's time consuming, but before playing a Scenario I generally go through the whole map and reduce all Trees in a Forest/Wood tile to only have one tree (instead of multiple) while maintaining appropriate ground cover. I also use trees with taller trunks and higher foliage, instead of ones with low hanging foliage. Both of the above seems to help reduce the possibility of having unrealistic Tree Detonation happening all the time as enemy tank has less trees to hide behind. Downside...Enemy (and you) might see further into woods, have less concealment, and it doesn't look as realistic (but I can live with these).
-
CMBN Overhead Floating Icons & Pause Delays Missing
JoMac replied to JoMac's topic in CM2 General Tech Support
So Far So Good, Vacillator (as long as we both stay away from Modern) ...Now, we are one Happy Family -
CMBN Overhead Floating Icons & Pause Delays Missing
JoMac replied to JoMac's topic in CM2 General Tech Support
Silly Me...Tricks are for Kids Yeap, and I inadvertently turned them off, but all is well now Oh, and thanks for that 'Settings' option, Simicro (now I remember). Thanks guys. -
CMBN Overhead Floating Icons & Pause Delays Missing
JoMac posted a topic in CM2 General Tech Support
CMBN 4.04...I just noticed that I have no 'Floating Icons' (just arrows). Also, none of the 'Pause Delays (15 sec, etc) show above a unit. Taking out and putting back 'Z Folder' Mods didn't matter. Sorry, but BF seems to only allow 114kb image size, and so I couldn't insert the bigger original size. -
AMD 23-series drivers crashes CMBS (not CMRT)
JoMac replied to LeBlaque's topic in CM2 General Tech Support
Actually, I went from old AMD 15.20 (something or other)for several years to 22.6.1. Since I only play CMx2 (for most part) I wont upgrade anytime soon (if I can help it)...I just don't want to take a chance and upgrade drivers any further for possible Crashes. -
AMD 23-series drivers crashes CMBS (not CMRT)
JoMac replied to LeBlaque's topic in CM2 General Tech Support
These Downloads solved my problem, and might helps yours: What did I do? I installed game drivers: Microsoft XNA Framework redistributable 4.0 OpenAL (Open Audio Library) Microsoft Visual C++ 2015- 2022 Redistributable (x86) All Slitherine-infected games are running smoothly, including Cold War -
Same here...Installed Micro Visual C++2015-2022 Redistribution (x86) and CMBN is working again. I also went ahead from AMD 15.20 Drivers to 22.6.1. Thanks for the fix @PIATpunk & @wolfgang500
-
Ok, downloaded from my BF Store/Installed into x86/activated all games and working well...Except CMBN. clicking both 'Play' at activation screen or Icon did nothing. Now, I did install CMBN to its default setup, which I think said User/OneDrive etc or somefink like that, and didn't start...So, I deleted and reinstalled into x86 and still no start.
-
Ahh, so probably that's the issue...My earlier purchases were 'Mail Orders' (which I still have the CD Cases), then later years switched to 'Online Orders'...Now I remember that process couple years ago when I first started using the 'Full Installers'. Will Download/Activate all my WWII Game/Modules, etc and see what happens. Thanks again, Costello...err, I mean @BFCElvis
-
Hey @BFCElvis, I see all the purchases I made over the years but not necessarily all the activations associated with them. Anyways, will Open a Help Desk Ticket shortly. Thanks again, Joe
-
Sounds Good Vacillator...Going to install rest of my WWII Titles and hope I don't run into same issue. I sure miss Win 7 (still have it on my laptop), but figured it's time to make the switch to Win 10 on PC.
-
Ok, I just went from Win 7 (which turns out to be probably fake) to Win 10. So, I have all the Modules, etc and went ahead and started activation of each. However, I went into my BF Orders Page and noticed that I was only able to activate 4.0, Vehicle Pack, and BP Scenario (couldn't find activation codes for others). Now, I thought when I did a full installer couple years ago that I had to activate 4.0 (maybe 3.0...can't remember), CW, Market Garden, BP Scenario, and Vehicle Pack. So now I can't play CMBN because I can't activate all Modules, etc ?
-
Cease-Fire...When does it take place
JoMac replied to JoMac's topic in Combat Mission Final Blitzkrieg
That's my guess...One of us accidentally canceled Cease-Fire at some point. -
Yeah, I'm surprised there are very few Oct-Nov Battles/Campaigns in CMFB...I guess BF decided to concentrate Scenarios from the Bulge time frame.
-
Playing a 30+ minute Meeting QB, and both sides did a Cease-Fire early in game (around 10 minutes into game), but game is still going now for past 3 turns. So, we continue to play normally until Cease-Fire does finally take place. Is there a certain time that has to elapse before Cease-Fire finally takes effect..I keep clicking on 'Cease-Fire' every turn, but it says; 'Cease-Fire' in effect. Do you want to cancel' (something to that effect). *Update*...Game Finally over after few minutes of being in Cease-Fire.
-
@Bulletpoint...Don't forget to get CMFI (if you don't already). This way you will have a West, South, and East Fronts.
-
Ok, if your Armor is using an 'Armor Arc' and Enemy Inf happens to run towards you, away, or parallel will it still fire the MG's ?...I think it still does, but might be range dependent.
-
Annual look at the year to come - 2023
JoMac replied to Battlefront.com's topic in Combat Mission - General Discussion
@VacillatorCMRT, CMBN, CMFB, CMFI...Modern stuff, not yet, not yet. Please...Don't go over the Dark-Side, and just stick with WWII -
Annual look at the year to come - 2023
JoMac replied to Battlefront.com's topic in Combat Mission - General Discussion
@Battlefront.com...Hey Steve, but trying to remember, is the Engine 5 Update roughly coming out for all of CMx2 by end of this year or early next? -
Battle for Normandy v4.04 patch is now available
JoMac replied to BFCElvis's topic in Combat Mission Battle for Normandy
Yeah, same issue here Ithikial, and just took out your 'Splash Screen' from the Main Menu (rest of your Mod is still working)...Oh, and I actually don't mind the new BFC 'Play/Pause' button as it seems to look half-way decent. -
Well, not worried about that Snapshot (but that too) as much as the Quick Spotting...I think since all CMx2 WWII Titles are derived from CMSF that the Spotting/Targeting should be toned down a little bit more.
-
Might have to start using 'Conscripts' for Armor so the accuracy of Spotting (and maybe hitting) will hopefully be toned down a bit.