Madmatt Posted June 26, 2007 Share Posted June 26, 2007 I would also suggest that you download and try this out with the new patch. For those with the demo, an updated demo version will be released soon as well. Madmatt Link to comment Share on other sites More sharing options...
RobboG Posted June 26, 2007 Share Posted June 26, 2007 Just had a CTD and there is a file called sound.log time stamped at the time it crashed. The contents are below ... -- new session -- num channels 16 cannot open file for reading Cannot open audio file samples/Error_empty.wav Does this mean anything and does it have to do with the CTD? Running current patch BTW. Regards Link to comment Share on other sites More sharing options...
Mastiff Posted June 26, 2007 Share Posted June 26, 2007 Originally posted by RobboG: Just had a CTD and there is a file called sound.log time stamped at the time it crashed. The contents are below ... -- new session -- num channels 16 cannot open file for reading Cannot open audio file samples/Error_empty.wav Does this mean anything and does it have to do with the CTD? Running current patch BTW. Regards No; but give us your system spec.Can't help with out system info. Link to comment Share on other sites More sharing options...
jackman Posted June 26, 2007 Share Posted June 26, 2007 hi when I atempt to load a battle the game CTD when I tried to load a training battle the game CTD with this message run time error #3(trap) Fatal error crash during termination. This has happened after I installed new patch which I have been waiting for as I havn't been able to run game yet see my earlier post your surgestion then was to run Tow setup exe? which I did with no success I can run the intro movie and access all the menu's. I was able to play the demo with no problems. I have tried every fix on this forum Intel Core(2) CPU 6300 1.86Ghz 1Gig ram Win XP pro sp2 NVIDIA GEForce 7800 GS Driver 94.24 Soundblaster Audigy Link to comment Share on other sites More sharing options...
Mastiff Posted June 26, 2007 Share Posted June 26, 2007 Originally posted by jackman: hi when I atempt to load a battle the game CTD when I tried to load a training battle the game CTD with this message run time error #3(trap) Fatal error crash during termination. This has happened after I installed new patch which I have been waiting for as I havn't been able to run game yet see my earlier post your surgestion then was to run Tow setup exe? which I did with no success I can run the intro movie and access all the menu's. I was able to play the demo with no problems. I have tried every fix on this forum Intel Core(2) CPU 6300 1.86Ghz 1Gig ram Win XP pro sp2 NVIDIA GEForce 7800 GS Driver 94.24 Soundblaster Audigy *** The following intergrated Video Chipsets and Video Cards are expressely NOT supported: Mobile Intel® 900, 915, 925, 82945G or 945GM/GU Express Chipsets Nvidia GF440MX and earlier ATI Radeon 9200 and earlier Link to comment Share on other sites More sharing options...
Mastiff Posted June 26, 2007 Share Posted June 26, 2007 Originally posted by jackman: hi when I atempt to load a battle the game CTD when I tried to load a training battle the game CTD with this message run time error #3(trap) Fatal error crash during termination. Intel Core(2) CPU 6300 1.86Ghz 1Gig ram Win XP pro sp2 NVIDIA GEForce 7800 GS Driver 94.24 Soundblaster Audigy This is being looked at by 1C company I have had this issue also but my game still runs. Try running with the shadows off. Link to comment Share on other sites More sharing options...
jackman Posted June 26, 2007 Share Posted June 26, 2007 have tried running with shadows off have tried running at min settings still no joy here is log file from crash [Jun 26, 2007 2:26:18 PM] ------------ BEGIN log session ------------- Sound: Native library (build 1.1, target - P IV) loaded. Main3D >>> renderer type: OPENGL ERROR file: File wwrcu not found ERROR: Command objectMove has conflict with Len ERROR: Command popupmenu has conflict with XYmove ERROR: More than 2 binds for command delete+ ERROR: Command turnObjectOnLine has conflict with Ymove Initializing DirectSound playback device... Primary buffer created. Playback format is set : sampling rate = 44100, num channels = 2. Buffer caps : Transfer rate = 0, CPU overhead = 0. Default speaker config is : 1310724. Direct sound audio device initialized successfully : DX Version : 7 Hardware - enabled [buffers : 64] Extensions - enabled : EAX ver. 1 [X] - enabled EAX ver. 2 [X] - enabled EAX ver. 3 [X] - enabled I3D ver. 2 [ ] - disabled ZoomFX [ ] - disabled MacroFX [ ] - disabled SIMD render [X] num channels 16 cannot open file for reading Cannot open audio file samples/Error_empty.wav Time overflow (0): speed 0.15498537 Time overflow (647): speed 0.11519263 Time overflow (908): speed 0.63559324 Static load ended. Time overflow (1159): speed 0.113065325 [Jun 26, 2007 2:28:47 PM] -------------- END log session ------------- Link to comment Share on other sites More sharing options...
Mastiff Posted June 26, 2007 Share Posted June 26, 2007 to be honest with you that error list actually only works for something else, so I would try this, What OS mode 32bit or 64bit? Also try tow setup.exe then go to where your game is and open up the directory and see if your 1.4 exe is in there, if so run that version see if that works. Try shadows off and Sound off do 2 seperate test I want to see something. it looks like it might be open GL causing the propblem. OpenAL Dirext X RDlist [ June 26, 2007, 02:46 PM: Message edited by: Wolfseven ] Link to comment Share on other sites More sharing options...
jackman Posted June 26, 2007 Share Posted June 26, 2007 Intel Core(2) CPU 6300 1.86Ghz 1Gig ram Win XP pro sp2 NVIDIA GEForce 7800 GS Driver 94.24 Soundblaster Audigy running Win xp pro 32bit ran Tow setup exe ran 1.4 exe still crashed!! Driver 94.24 are lastest drivers have run demo with these drivers? (it looks like it might be open GL causeing the propblem) anything I can do about this? Link to comment Share on other sites More sharing options...
Mastiff Posted June 26, 2007 Share Posted June 26, 2007 Originally posted by jackman: Intel Core(2) CPU 6300 1.86Ghz 1Gig ram Win XP pro sp2 NVIDIA GEForce 7800 GS Driver 94.24 Soundblaster Audigy running Win xp pro 32bit ran Tow setup exe ran 1.4 exe still crashed!! Driver 94.24 are lastest drivers have run demo with these drivers? (it looks like it might be open GL causeing the propblem) anything I can do about this? yes go to the previous post and click on the links I put up for you. Did you install the license and try reinstalling the license Link to comment Share on other sites More sharing options...
GriffinCheng+ Posted June 27, 2007 Share Posted June 27, 2007 Originally posted by RobboG: Just had a CTD and there is a file called sound.log time stamped at the time it crashed. The contents are below ... -- new session -- num channels 16 cannot open file for reading Cannot open audio file samples/Error_empty.wav Does this mean anything and does it have to do with the CTD? Running current patch BTW. Regards Similar thing happens to the demo version, just that the demo auto-reboots. Email has been sent. Hope to hear from you guys soon. Link to comment Share on other sites More sharing options...
bus Posted June 27, 2007 Share Posted June 27, 2007 Originally posted by Wolfseven: </font><blockquote>quote:</font><hr />Originally posted by bus: </font><blockquote>quote:</font><hr />Originally posted by bus: I have now installed a new PSU (520W). ToW is working better. But I have still the problem that ToW crash to desktop. Any other suggestions what it could be?? /bus </font><blockquote>quote:</font><hr />Originally posted by bus: </font><blockquote>quote:</font><hr />Originally posted by Wolfseven: </font><blockquote>quote:</font><hr /> ToW demanding lot of “computer power”, and My PSU is too small to supply my CPU, RAM and my Graphic card with that kind of power. My suggestion to others (which have similar problems) is try to disconnect some drive and try to play ToW. My computer: P4 3,0GHz 2GB ram GeForce 6600 (256MB) DVD and DVD/R (did discon. the DVD) PSU 330WBus I beleave your PSU (power supply Unit) is at fault here you have a 3.0 ghz is this a dual core? and your GeForce 6600 Is this PCIe If so you really should be running a PSU of 500watts or more with 12v rails of 32amps. </font> Link to comment Share on other sites More sharing options...
Mastiff Posted June 27, 2007 Share Posted June 27, 2007 Bus you know how to go into your Bios and see if your set up for half of Video ram 256 not the whole amount to 128. Fast write enabled? Link to comment Share on other sites More sharing options...
Petteerr Posted June 27, 2007 Share Posted June 27, 2007 Hi, Same problem here,after playing for a couple of minutes it crashes to desktop or reboots!!Lately when it is to crash it reboots all the time,i also have experience the runtime error when i try to exit the game! For me, with this patch the game is unplayable AMD5800+ X86 ATI X1950 GT 512 MB 4MB RAM ASUS CROSSHAIR 600 WATT WINDOWS XP SEFVICE PACK 2 Link to comment Share on other sites More sharing options...
bus Posted June 27, 2007 Share Posted June 27, 2007 Originally posted by Wolfseven: Bus you know how to go into your Bios and see if your set up for half of Video ram 256 not the whole amount to 128. Fast write enabled? What do you mean? I have sat my BIOS to 256MB. Shall I change it to 128? Link to comment Share on other sites More sharing options...
Mastiff Posted June 27, 2007 Share Posted June 27, 2007 Originally posted by bus: </font><blockquote>quote:</font><hr />Originally posted by Wolfseven: Bus you know how to go into your Bios and see if your set up for half of Video ram 256 not the whole amount to 128. Fast write enabled? What do you mean? I have sat my BIOS to 256MB. Shall I change it to 128? </font> Link to comment Share on other sites More sharing options...
Mastiff Posted June 27, 2007 Share Posted June 27, 2007 Originally posted by Petteerr: Hi, Same problem here,after playing for a couple of minutes it crashes to desktop or reboots!!Lately when it is to crash it reboots all the time,i also have experience the runtime error when i try to exit the game! For me, with this patch the game is unplayable AMD5800+ X86 ATI X1950 GT 512 MB 4MB RAM ASUS CROSSHAIR 600 WATT WINDOWS XP SEFVICE PACK 2 run tow setup and then just turn the water to low. Link to comment Share on other sites More sharing options...
jackman Posted June 27, 2007 Share Posted June 27, 2007 hi I'm back when you say try running tow setup.exe do you mean reinstall the game?? because there is a towsetup.exe file in the TOW Dir which runs the TOW system Options !!! I will install OpenGL files and reinstall game sorry seem to have got wrong end of stick ( I'm not very clever but I can lift very heavy wieghts ) Link to comment Share on other sites More sharing options...
Madmatt Posted June 27, 2007 Share Posted June 27, 2007 No he means the towsetup.exe which allows you to set the game settings/graphics options. Madmatt Link to comment Share on other sites More sharing options...
jackman Posted June 27, 2007 Share Posted June 27, 2007 thanks for clearing that up! Originally posted by Wolfseven Also try tow setup.exe then go to where your game is and open up the directory and see if your 1.4 exe is in there, if so run that version see if that works. Try shadows off and Sound off do 2 seperate test I want to see something. Have tried all these plus relicening crash semms to happen when game switches to battle map screen from menus eg battle or campain game has finished loading loading bar gets all the way across then screen flashes blank then back to desktop? Intel Core(2) CPU 6300 1.86Ghz 1Gig ram Win XP pro sp2 32bit NVIDIA GEForce 7800 GS Driver 94.24 Soundblaster Audigy directx 9c Link to comment Share on other sites More sharing options...
GriffinCheng+ Posted June 27, 2007 Share Posted June 27, 2007 Well, after switching off "EAX", everything is fine now. Good game! Link to comment Share on other sites More sharing options...
Mastiff Posted June 28, 2007 Share Posted June 28, 2007 Originally posted by jackman: thanks for clearing that up! Originally posted by Wolfseven Also try tow setup.exe then go to where your game is and open up the directory and see if your 1.4 exe is in there, if so run that version see if that works. Try shadows off and Sound off do 2 seperate test I want to see something. Have tried all these plus relicening crash semms to happen when game switches to battle map screen from menus eg battle or campain game has finished loading loading bar gets all the way across then screen flashes blank then back to desktop? Intel Core(2) CPU 6300 1.86Ghz 1Gig ram Win XP pro sp2 32bit NVIDIA GEForce 7800 GS Driver 94.24 Soundblaster Audigy directx 9c Minimum requirments Operating System: Windows XP* Processor: Pentium IV 2.6 GHz or AMD Athlon 2.0 GHz I just noticed your running alittle lower speed there might be that so try running it with the duo core single checked then unchecked see which works. Video Card: GeForce 5700 or Radeon 9600 (128 Megabyte VRAM or better, video card must support Shader v2.0 or higher)*** Sound Card: DirectX 9 compatible Sound Card System Memory: 1 Gigabyte RAM Hard Drive Space: 3 Gigabyte Other Requirements: DVD Drive (not needed for download version) Link to comment Share on other sites More sharing options...
bus Posted June 28, 2007 Share Posted June 28, 2007 Originally posted by Wolfseven: </font><blockquote>quote:</font><hr />Originally posted by bus: </font><blockquote>quote:</font><hr />Originally posted by Wolfseven: Bus you know how to go into your Bios and see if your set up for half of Video ram 256 not the whole amount to 128. Fast write enabled? What do you mean? I have sat my BIOS to 256MB. Shall I change it to 128? </font> Link to comment Share on other sites More sharing options...
Mastiff Posted June 28, 2007 Share Posted June 28, 2007 BUSS: Run the TOWsetup.exe turn water to low. turn off EAX. if that doesn't work try running the 1.4exe thats in the Theatre of war directory. Remember to post with your system information in the signature file so we know which computer spec we are dealing with. Link to comment Share on other sites More sharing options...
bus Posted June 28, 2007 Share Posted June 28, 2007 Originally posted by Wolfseven: BUSS: Run the TOWsetup.exe turn water to low. turn off EAX. if that doesn't work try running the 1.4exe thats in the Theatre of war directory. Remember to post with your system information in the signature file so we know which computer spec we are dealing with. Done that, and it still crashing. Link to comment Share on other sites More sharing options...
Recommended Posts