Holman Posted May 14, 2002 Share Posted May 14, 2002 Hi all, Recently there have been some threads reporting problems with GeForce 4 video cards, especially with CM showing only a blank screen or else freezing (requiring a reboot) at the end of a turn. Having just updated from a GeForce 2 to a Geforce 4, I'm sorry to say that I'm having the same troubles. The CM splash screen will not show when I start up (only giving me music and a black screen) until I minimize and re-maximize. When I attempt the play a turn, the graphics are fine until I hit Go/Done to end the turn--then CM freezes and I have to ctrl-alt-delete my system. My question is, does *anyone* have CM running properly with a GeForce 4 card? If so, please tell us what drivers you are using and whether you have made any special tweaks. Thanks! My set-up (CM and GeForce 4 *not* working together): AMD 1.0 GHz processor 640 MB RAM PNY GeForce 4 Ti4400 128MB RAM NVidia drivers 28.32 0 Quote Link to comment Share on other sites More sharing options...
Agua Posted May 15, 2002 Share Posted May 15, 2002 I have an Xtasy Ti 4600 GeForce 4, 128mb DDR / 300mgz graphic processor. I have the 28.32 drivers. No problems whatsoever. [edited to fully respond to the question] No tweaks, other than setting my AGP aperature in the BIOS to 256mb, but that was not necessitated by any problems with the card / CM. Sorry I can't be of any help. [ May 14, 2002, 07:03 PM: Message edited by: Agua ] 0 Quote Link to comment Share on other sites More sharing options...
pritzl Posted May 15, 2002 Share Posted May 15, 2002 try disabling the Anti-aliasing. That will likely clear up the problem. 0 Quote Link to comment Share on other sites More sharing options...
Schrullenhaft Posted May 15, 2002 Share Posted May 15, 2002 I'm just going to annoyingly link all these threads to another one with GeForce 4 problems. The GeForce 4 MX Problems thread has some info that might address some of the problems that people have been running into. [ May 14, 2002, 09:05 PM: Message edited by: Schrullenhaft ] 0 Quote Link to comment Share on other sites More sharing options...
Treeburst155 Posted May 18, 2002 Share Posted May 18, 2002 The cause of this problem appears to be Quincunx FSAA. Try using regular 2x or 4x FSAA. Treeburst155 out. 0 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.