edudak Posted February 15, 2012 Share Posted February 15, 2012 For some reason my engineer units cannot mark mines. That option in the "Move" commands is there but dark and not responsive. Is this a known bug? I've not seen any discussion of this problem as yet. 0 Quote Link to comment Share on other sites More sharing options...
YankeeDog Posted February 15, 2012 Share Posted February 15, 2012 Are they within one action spot of a spotted minefield? And are they in good morale state? 0 Quote Link to comment Share on other sites More sharing options...
Wreck Posted February 15, 2012 Share Posted February 15, 2012 http://combatmission.wikia.com/wiki/Mark_mines 0 Quote Link to comment Share on other sites More sharing options...
Wreck Posted February 15, 2012 Share Posted February 15, 2012 You may also have seen the "double minefield" bug, which I reported in this thread: http://www.battlefront.com/community/showthread.php?t=101734 I don't know whether BFC noticed or not; I assume they read everything here and so did. 0 Quote Link to comment Share on other sites More sharing options...
edudak Posted February 17, 2012 Author Share Posted February 17, 2012 Are they within one action spot of a spotted minefield? And are they in good morale state? That seems to have taken care of it. I'm not sure which (or both) I may have been doing wrong but it now is working. Thanks. -Ed 0 Quote Link to comment Share on other sites More sharing options...
chas_in_mlb Posted June 21, 2012 Share Posted June 21, 2012 I have NEVER seen my engineers complete this task. Do I walk them through the minefield? Around it? All I seem to be able to do is get my engineers killed. I am using the MARK MINES button "on" but no results. Help with this would be appreciated. 0 Quote Link to comment Share on other sites More sharing options...
ridethe415 Posted June 21, 2012 Share Posted June 21, 2012 I have NEVER seen my engineers complete this task. Do I walk them through the minefield? Around it? All I seem to be able to do is get my engineers killed. I am using the MARK MINES button "on" but no results. Help with this would be appreciated. From the above wiki link An order to mark mines is only allowed on a known minefield which is not already marked. Also, it is only allowed when the location of the engineer unit, or its last waypoint, is close to the known minefield. ("Close" here means in the same action spot, or in any of the eight adjacent action spots.) A unit performing a mark mines move will sit still for two or three minutes, not even turning to face the direction of the mines. Then, at the start of a turn, you will notice that the minefield's warning sign turned from red to light yellow; in that same turn, the engineer will crawl onto the now-tamed minefield. 0 Quote Link to comment Share on other sites More sharing options...
womble Posted June 21, 2012 Share Posted June 21, 2012 They also don't clear mines too well when cowering or firing or spotting. So they need to be unmolested while they're doing their thing. 0 Quote Link to comment Share on other sites More sharing options...
chas_in_mlb Posted June 21, 2012 Share Posted June 21, 2012 Muy gracias. 0 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.