william6 Posted December 17, 2002 Share Posted December 17, 2002 I an having a problem mith my games. My cmbo as i start to play the CP just goes to a blank screen and restarts. hear are my pc specs: OS Name Microsoft Windows XP Home Edition Version 5.1.2600 Service Pack 1 Build 2600 OS Manufacturer Microsoft Corporation System Name FAMILYCP System Manufacturer GATEWA System Model N0CPP063 System Type X86-based PC Processor x86 Family 15 Model 0 Stepping 7 GenuineIntel ~1296 Mhz BIOS Version/Date Intel Corp. GB85010A.15A.0046.P13.0108201551, 8/20/2001 SMBIOS Version 2.3 Windows Directory C:\WINDOWS System Directory C:\WINDOWS\System32 Boot Device \Device\HarddiskVolume1 Locale United States Hardware Abstraction Layer Version = "5.1.2600.1106 (xpsp1.020828-1920)" User Name FAMILYCP\William Poole Time Zone Pacific Standard Time Total Physical Memory 512.00 MB Available Physical Memory 327.86 MB Total Virtual Memory 4.88 GB Available Virtual Memory 4.56 GB Page File Space 4.38 GB Page File C:\pagefile.sys 0xFF800000-0xFF8FFFFF Intel® 82850/82860 Processor to AGP Controller - 2532 OK 0xD6900000-0xF69FFFFF Intel® 82850/82860 Processor to AGP Controller - 2532 OK 0xF8000000-0xFBFFFFFF Intel® 82850/82860 Processor to AGP Controller - 2532 OK 0xE8000000-0xEFFFFFFF RADEON 9000 PRO OK 0xFF8F0000-0xFF8FFFFF RADEON 9000 PRO OK 0xE0000000-0xE7FFFFFF RADEON 9000 PRO - Secondary OK 0xFF8E0000-0xFF8EFFFF RADEON 9000 PRO - Secondary OK 0xFF9FFC00-0xFF9FFCFF SMC EZ Card 10/100 PCI (SMC1211 Series) OK 0xFF9FE000-0xFF9FEFFF BCM V.90 56K Modem OK 0xFFF00000-0xFFFFFFFF Intel® 82802 Firmware Hub Device OK 0xFFB00000-0xFFBFFFFF Intel® 82802 Firmware Hub Device OK 0x0000-0x9FFFF System board OK 0xFEE00000-0xFEE00FFF System board OK 0xA0000-0xBFFFF Intel® 82850/82860 Processor to AGP Controller - 2532 OK 0xA0000-0xBFFFF RADEON 9000 PRO OK 0xE0000-0xFFFFF System board OK 0x100000-0x1FFFFFFF System board OK 0x20000000-0xFFAFFFFF PCI bus OK Name RADEON 9000 PRO PNP Device ID PCI\VEN_1002&DEV_4966&SUBSYS_00021002&REV_01\4&252D6E8&0&0008 Adapter Type Radeon 9000 (IF) Pro, ATI Technologies Inc. compatible Adapter Description RADEON 9000 PRO Adapter RAM 128.00 MB (134,217,728 bytes) Installed Drivers ati2dvag.dll Driver Version 5.1.2600.0 INF File oem3.inf (ati2mtag_RV250 section) Color Planes 1 Color Table Entries 65536 Resolution 1024 x 768 x 60 hertz Bits/Pixel 16 Memory Address 0xE8000000-0xEFFFFFFF I/O Port 0x0000C800-0x0000C8FF Memory Address 0xFF8F0000-0xFF8FFFFF IRQ Channel IRQ 11 I/O Port 0x000003B0-0x000003BB I/O Port 0x000003C0-0x000003DF Memory Address 0xA0000-0xBFFFF Driver c:\windows\system32\drivers\ati2mtag.sys (6.13.10.6218, 527.63 KB (540,288 bytes), 11/7/2002 10:20 PM) Name RADEON 9000 PRO - Secondary PNP Device ID PCI\VEN_1002&DEV_496E&SUBSYS_00031002&REV_01\4&252D6E8&0&0108 Adapter Type Radeon 9000 (IF) Pro, ATI Technologies Inc. compatible Adapter Description RADEON 9000 PRO - Secondary Adapter RAM 128.00 MB (134,217,728 bytes) Installed Drivers ati2dvag.dll Driver Version 5.1.2600.0 INF File oem3.inf (ati2mtag_RV250 section) Color Planes Not Available Color Table Entries Not Available Resolution Not Available Bits/Pixel Not Available Memory Address 0xE0000000-0xE7FFFFFF Memory Address 0xFF8E0000-0xFF8EFFFF Driver c:\windows\system32\drivers\ati2mtag.sys (6.13.10.6218, 527.63 KB (540,288 bytes), 11/7/2002 10:20 PM) Name Creative Sound Blaster PCI128 (WDM) Manufacturer Creative Technology Ltd. Status OK PNP Device ID PCI\VEN_1274&DEV_1371&SUBSYS_13711274&REV_09\4&2B96F39&0&50F0 I/O Port 0x0000DF00-0x0000DF3F IRQ Channel IRQ 3 Driver c:\windows\system32\drivers\sbpci.sys (5.12.01.2065, 481.13 KB (492,672 bytes), 10/26/2001 2:00 AM) Name Unimodem Half-Duplex Audio Device Manufacturer Microsoft Status OK PNP Device ID MODEMWAVE\0\{AE1EF17B-6527-4CC1-AF8A-4441FD035E1C} Driver c:\windows\system32\drivers\modemcsa.sys (5.1.2600.0 (xpclient.010817-1148), 15.75 KB (16,128 bytes), 12/13/2002 10:43 PM) Please help William Poole 0 Quote Link to comment Share on other sites More sharing options...
Schrullenhaft Posted December 17, 2002 Share Posted December 17, 2002 I suggest downloading and installing Catalyst 2.3, which isn't the latest driver (v. 2.5). It's the second driver in this list. Some users of Catalyst 2.4 (and possibly 2.5) have reported the 'blank screen' problem, with may be due to FSAA (which ATI calls something else). However the easiest bet is to go back to 2.3. Looking at your current drivers it seems, according to the version numbers, that you have a driver that was actually intended for Windows 2000 rather than XP (though they're often interchangable). 0 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.