Problem with tanks crossing a bridge

[Bonito]

Hello,

there seem to be a minor 'bug' in CM

Tanks have often problems to cross a bridge, e.g. sometimes they get confused without being shot at and do some silly thinks.

(reverse some meters, going formward etc., or

miss the begin of the bridge and drive down the hill etc.)

Its within CM1.05 and was seen in the mission 'Nijmegen'

[Airborne]

I have seen something similar only when the vehicles jam up at the bridge. Make sure you use adequate spacing (use the pause command) between vehicles. Otherwise, tanks and vehicles seem to negotiate bridges fine.

If driven close to a bridge edge at the ends, they do tend to "fall" off of the bridge. Hope this helps.

------------------

"If it bleeds..we can kill it."

[Airborne]

Grrrrrr, double post..

------------------

"If it bleeds..we can kill it."

[This message has been edited by Airborne (edited 11-21-2000).]

[Bonito]

<BLOCKQUOTE>quote:</font><HR>Originally posted by Airborne:

I have seen something similar only when the vehicles jam up at the bridge. Make sure you use adequate spacing (use the pause command) between vehicles. Otherwise, tanks and vehicles seem to negotiate bridges fine.

If driven close to a bridge edge at the ends, they do tend to "fall" off of the bridge. Hope this helps.<HR></BLOCKQUOTE>

Well I have seen exact this behaviour ...

should this not be considered as a bug?

If only because its unrealistic for a tank to fall off a bridge etc.?