Guest gyrene251 Posted May 20, 2000 Share Posted May 20, 2000 I am getting blocky looking smoke (from arty and mortars when laid) with this card. I did a search and found that the driver may be the culprit. Does anyone know if there is an updated driver for this card and where I can find it (assuming of course that it will fix my problem)? Thanks in advance. Link to comment Share on other sites More sharing options...
Mark IV Posted May 20, 2000 Share Posted May 20, 2000 You need to start here http://www.3dfxgamers.com/view.asp?PAGE=V3Drivers . The driver update is unique to your operating system, so you need to look for "Win 9x" (95 or 98) or Win 2000. If you are using NT it sounds like you can forget it. The January update worked for my Voodoo 3 3000. Link to comment Share on other sites More sharing options...
Guest gyrene251 Posted May 20, 2000 Share Posted May 20, 2000 All they have is a beta driver for my Voodoo3 2000 card. I'll just play in fast and compatible until one comes out. Thanks for the help. Link to comment Share on other sites More sharing options...
Mark IV Posted May 20, 2000 Share Posted May 20, 2000 Try http://www.3dfxgamers.com/drivers/voodoo3/voodoo3_win9x_new.stm This is for the Voodoo 3 2000 and 3000 and is dated 1/27/00. Link to comment Share on other sites More sharing options...
Recommended Posts