Glide87th
-
Posts
10 -
Joined
-
Last visited
Posts posted by Glide87th
-
-
I think the Russian anti-tank rifles need fixing. These units seem way too effective than they used to be in CM. They disable the German Pz III's and Pz IV's, and then systematically eliminate all the crew. The AI must be able to target the crew individually as opposed to just firing on the tank until it stops responding.
-
So, I should pick a map with two small towns and make the best of it. I can swap in another map at a later date.
Thanks
Glide
-
I would like to create some historic battles, and I was wondering about the availability of new maps. I need the Carpiquet Airfield just outside of Caen, and the Caen maps don't extend out that far. How are maps created? Are there more maps coming? Do any of the maps have an airfield that I can use until I can create the authentic one?
Glide
-
I have the same problem as Leger. I have wiped the map of opposing forces twice, but I can't get the mission to end. One thing to note, I start with my forces already across the first set of bridges at set up. Perhaps this fails to trigger some event in the game.
Anyone else having problems getting this one to end?
Glide
-
Also see the 'If you have a dual core' thread. That fixed things for me.
AM2 3800
Nvidia 7950GT
Glide
-
This, along with the CPU affinity tweak, fixed my problems. Thanks.
-
-------------------------
CPU-Z version 1.40
-------------------------
Processors Map
------------------------------------------------------------------------------------
Number of processors 1
Number of threads 2
Processor 0
-- Core 0
-- Thread 0
-- Core 1
-- Thread 0
Processors Information
------------------------------------------------------------------------------------
Processor 1 (ID = 0)
Number of cores 2
Number of threads 2 (max 2)
Name AMD Athlon 64 X2 3800+
Codename Windsor
Specification AMD Athlon 64 X2 Dual Core Processor 3800+
Package Socket AM2 (940)
CPUID F.B.2
Extended CPUID F.4B
Brand ID 4
Core Stepping BH-F2
Technology 90 nm
Core Speed 2009.4 MHz (10.0 x 200.9 MHz)
HT Link speed 1004.7 MHz
Stock frequency 2000 MHz
Instructions sets MMX (+), 3DNow! (+), SSE, SSE2, SSE3, x86-64
L1 Data cache 2 x 64 KBytes, 2-way set associative, 64-byte line size
L1 Instruction cache 2 x 64 KBytes, 2-way set associative, 64-byte line size
L2 cache 2 x 512 KBytes, 16-way set associative, 64-byte line size
FID/VID Control yes
max FID 10.0x
VID range 1.125V - 1.350V
K8 Thermal sensor yes
K8 Revision ID 5.2
Nvidia 7950GT
2GB DUAL Channel RAM
Windows XP SP
TOW Demo
1024x768@60
Shadows none
No EAX
Water detail Low
Trees High
Model Quality High
Very Thick Grass
Trees Rendering High
Show Roads
Hide Bodies
Always show combat gear
Hardware mouse cursor
Show vehicle motion effects
high landscape detail
high sky detail
Use only one cpu NOT CHECKED
I get about 60 fps in the menu screens using FRAPS. It drops down to 1 FPS in the loading screen but pops up to about 45 fps towards the end of loading. It is flat at 1 FPS in the Last Frontier Mission.
After the CPU Affinity tweak, I get about 12-15 FPS during the Last Frontier Mission. No change in the menu or loading screens.
Glide
-
now you should be doing good make sure your setup TOW is set to uncheck 1 CPU and water Low Music off EAX offOriginally posted by Wolfseven:</font><blockquote>quote:</font><hr />Originally posted by Glide87th:
How do you turn on FPS? Mine are extremely low, around 1 frame every 5 seconds.
-------------------------
CPU-Z version 1.40
-------------------------
Processors Map
------------------------------------------------------------------------------------
Number of processors 1
Number of threads 2
Processor 0
-- Core 0
-- Thread 0
-- Core 1
-- Thread 0
Processors Information
------------------------------------------------------------------------------------
Processor 1 (ID = 0)
Number of cores 2
Number of threads 2 (max 2)
Name AMD Athlon 64 X2 3800+
Codename Windsor
Specification AMD Athlon 64 X2 Dual Core Processor 3800+
Package Socket AM2 (940)
CPUID F.B.2
Extended CPUID F.4B
Brand ID 4
Core Stepping BH-F2
Technology 90 nm
Core Speed 2009.4 MHz (10.0 x 200.9 MHz)
HT Link speed 1004.7 MHz
Stock frequency 2000 MHz
Instructions sets MMX (+), 3DNow! (+), SSE, SSE2, SSE3, x86-64
L1 Data cache 2 x 64 KBytes, 2-way set associative, 64-byte line size
L1 Instruction cache 2 x 64 KBytes, 2-way set associative, 64-byte line size
L2 cache 2 x 512 KBytes, 16-way set associative, 64-byte line size
FID/VID Control yes
max FID 10.0x
VID range 1.125V - 1.350V
K8 Thermal sensor yes
K8 Revision ID 5.2
Attached device PCI device at bus 0, device 24, function 0
Attached device PCI device at bus 0, device 24, function 1
Attached device PCI device at bus 0, device 24, function 2
Attached device PCI device at bus 0, device 24, function 3
2GB Ram
Nvidia 7950GT
Shadows off all els eyou can leave as is or make it medium.Example </font>
-
How do you turn on FPS? Mine are extremely low, around 1 frame every 5 seconds.
-------------------------
CPU-Z version 1.40
-------------------------
Processors Map
------------------------------------------------------------------------------------
Number of processors 1
Number of threads 2
Processor 0
-- Core 0
-- Thread 0
-- Core 1
-- Thread 0
Processors Information
------------------------------------------------------------------------------------
Processor 1 (ID = 0)
Number of cores 2
Number of threads 2 (max 2)
Name AMD Athlon 64 X2 3800+
Codename Windsor
Specification AMD Athlon 64 X2 Dual Core Processor 3800+
Package Socket AM2 (940)
CPUID F.B.2
Extended CPUID F.4B
Brand ID 4
Core Stepping BH-F2
Technology 90 nm
Core Speed 2009.4 MHz (10.0 x 200.9 MHz)
HT Link speed 1004.7 MHz
Stock frequency 2000 MHz
Instructions sets MMX (+), 3DNow! (+), SSE, SSE2, SSE3, x86-64
L1 Data cache 2 x 64 KBytes, 2-way set associative, 64-byte line size
L1 Instruction cache 2 x 64 KBytes, 2-way set associative, 64-byte line size
L2 cache 2 x 512 KBytes, 16-way set associative, 64-byte line size
FID/VID Control yes
max FID 10.0x
VID range 1.125V - 1.350V
K8 Thermal sensor yes
K8 Revision ID 5.2
Attached device PCI device at bus 0, device 24, function 0
Attached device PCI device at bus 0, device 24, function 1
Attached device PCI device at bus 0, device 24, function 2
Attached device PCI device at bus 0, device 24, function 3
2GB Ram
Nvidia 7950GT
crashing/locking after night mission
in Combat Mission: Shock Force Tech Support
Posted
Same here. Have you tried replaying the previous mission? My saved game crashed half way through loading. I am going to try replaying the previous mission and saving again.