Jump to content

Future US AFV development


Recommended Posts

13 hours ago, BTR said:

Eh, the APS are to be mounted on SEP v2s atm as they'll be running alongside the projected v3 upgrades in 2020+. So we can skip low profile :D.

Depends. If we're pushing tanks to depot there's reason to do more upgrades at once vs less.  Also if we're doing what has been done historically, taking mothballed earlier model Abrams, and rebuilding them with all the upgrades, again there's not much logic to not going all-in on the upgrade package.  

With that said, If I had to guess the push will be the initial fielding as a plug and play separate item vs a fixed part of the tank.  This is basically how the TUSK was fielded, and would stretch as smaller number of COTS APS type systems over the tank fleet while a more lasting system is either fielded, or at the least, US adapted and adopted Trophy fielding.  

Link to post
Share on other sites
  • Replies 152
  • Created
  • Last Reply

Top Posters In This Topic

Considering Trophy was ordered to function by 2019 I guess it is going to be deployed on existing SEP II as a separate item for the moment. Post 2020 it is going to be universally applied as part of refurbishment for SEP III. At least the MOD communicated APS as part of the SEP III package from what I read. 

More promo stuff:

GER6zWJ.jpg

 

Edited by BTR
Link to post
Share on other sites

Some more details:

U.S. Army to Equip Its European-Based Armored Brigade with TROPHY APS

By Tamir Eshel - Oct 10, 2017

trophy3_zpskexmpbkt.png

The M-1A2 TROPHY integration used turret-side mounted modules, similar to those used on Israel's Merkava Mk4. The M-1A2SEPv2 is seen here fitted with the Abrams Reactive Armor Tile (ARAT) package recently added to the Abrams' survivability kit. Photo: US Army via Leonardo

After years of evaluations and experimentation with active protection systems (APS) technologies, the US Army finally moves fast to equip its M-1A2 SEPv2 main battle tanks with lifesaving APS – Israel’s TROPHY was selected, realizing it is the only system of its kind that has proved its worth in real combat. 

M-1A2SEPv2 is the latest operational variant of the M-1 Abrams tank. These systems are expected to enhance the operational effectiveness of the U.S. main battle tank, enabling tank formations to become more survivable and decisive against anti-tank threats.

The U.S. Army has recently received the latest modernized version (SEPv3) of the tank and has recently awarded the original manufacturer of the tank, General Dynamics Land Systems (GDLS), to propose new upgrades for a follow-on SEPv4 variant.

Relying on non-developmental technology, the integration of Trophy on the M-1A2 SEPv2 took only six months, and in the evaluations, its performance TROPHY exceeded the Army expectations. Following the successful completion of the first phase, the program moves to the next testing phase. Since Trophy is an operational system that has proved its worth, the Army is not waiting for the completion of this second testing phase and simultaneously enter production, to meet the Army’s tight fielding schedule.

trophy2_zpsaee1lmtd.png
THROPY integration on M1A2 used turret-side mounted modules, adapted from theose deployed on IDF Namer and Merkava Mk4. Photo: Leonardo

The acquisition of the TROPHY brigade set for the M-1A2 SEPv2 is limited to one brigade set and is managed under the modification and support contract of the Abrams tank as an urgent material release. The U.S. already has one armored brigade deployed in Europe on an annual rotation; the APS-equipped brigade is expected to remain in Europe on a permanent basis. Future equipping decisions will be taken under the APS ‘Program of Record’ after the system integrates the forthcoming Modular APS (MAPS) architecture, that will enable the Army to ‘plug and play’ new, emerging detection and defeat technologies. The current system employs four IAI Elta ELM-2133 Windguard radars According to Rafael Advanced Defense Systems, the system’s developer, and its US team-member DRS Technologies of the Leonardo Group, TROPHY is designed with the ability to accept future technologies and capabilities.

The Israeli Ministry of Defense and Defense Forces put TROPHY through a four-year safety certification process before approving its operational use aboard the Merkava Mk4 tank in 2010.

trophy_zps31za4ejy.png
The M-1A2 TROPHY integration used turret-side mounted modules, similar to those used on Israel’s Merkava Mk4.

© Copyright 2002-2017 Defense-Update

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...