Shatter

Thankyou, while I was impatient, I could not wait I got CMBN with all upgrades running just fine. Well except a little sound issue I have not figured out yet. I am not hearing all sounds that should be. For instance I will hear a Flak88 fire, then right after hear MG or Infantry fire, Flak 88 fires 2nd time but no sound, because I am still hearing infantry fire. Any thoughts??? Sound card is working fine with all other games.

Nice to see some good old faces from the early days still on the board.

I have been around since the first days of CMBO. I did a fair amount of modding for CMBB. I am a family man now and lost sight of CM for a couple years. A year ago I was extremely excited to see CMBN with a new engine was out. I only have CMBN not commonwealth or Italy/Gustov yet. I was going to get the Commonwealth today. Here is the question: Since my CMBN is updated to 2.1, will Commonwealth update work with 2.1. The BFC store page says Commonwealth is engine 1.0??? Will they work or do I need a fresh install???

Sounds good, I am going to order tonight. Thanks for heads up. Nice to see some of you guys are still around. Can't wait for to get it, I use to play DFDR loads, way back when it was first released. From the demo, the desert combat was real plus for me, especially with Older US units. Thanks

Finally after moving from Texas to Indiana, and getting everything in order, I finally have a little time to spare. I DL'd CMAK demo last night and really like desert scenario, the dust and playing as the good old US won me over. Most likely I will puchase CMAK, it only makes sense to add CMAK to my collection of CMBO, CMBB. What I would like to know is what else al of you guys like about CMAK units, terrain, ect. Man where the heck did all the old members go? Looked at all the posts and see nothing new names. I see MikeT is still CMMOSSing. Thanks MIKE [ May 05, 2004, 01:45 AM: Message edited by: Shatter ]

This is my Pops PC I am working with. Gateway PC Athlon 1.0 Win Me 256 meg sdram 20gig HD Sound Blaster Live Geforce Tnt 16meg card. Problem is I walk him through a windows reinstall a month or so ago. Never really fixed the problems. The problems are wide ranging. 1. PC will often lock up during boot. 2. Sometimes during bootup sound plays and continues to skip and PC is locked up. 3. PC boots up fine 5-30 mins later locks up. 4. PC boots up fine but does not recongnize either Rom or Burner. 5. Sometimes no sound at all. PC has no problems at all in safe mode. As soon as I load all windows Drivers Locks up 5-30 mins. I thought maybe sound card was bad but it works fine in another PC, at least the 20 mins I had it in. My Dad has another PC which is a newer Dell with XP. I thought to put XP on his older PC, but I am not sure if it will work being the PC is Gateway, and trying load XP from Dell disks. Plus he has a new Laptop, with XP I thought to use XP from that but that is HP so not sure if HP disk will work with Gateway. Help me out somebody

Well as for the options they are not my main priority, but I can tell ya I am working on them daily. As for a time frame, best guess is sometimes in the next 2 weeks.

The killer double post strikes again. [ April 09, 2003, 08:36 PM: Message edited by: Shatter ]

What you mean your tempted, Dl and check'em out.

The next in the long list of mods that I still am planning to do. Sorry it took so long to get these out, real life has been kicking me in th rear lately. I was planning on going on to the PZIII series, but I am so sick of looking at Panzers.I think I will go onto some SP or Stugs, then come back to them. Anyway get them at the usual place. http://www.cmmods.com/

Well I am glad everyone likes them. I am fairly close to completion of the PZIVC,D & E. I am also working on the Tiger, Flak Trucks are also close to being done, I just need to finish my new Hi-res flak shieds. I need to find the time to mess around with them. This week does not look good. My Dad works for a Sponsor for a couple of the Winston Cup cars and they are here in Texas this week. So I will be in the pits with the hotties, drinking beer all week. Right this min I am sitting in Texas motor speedway, in million dollar touring coach living it up. God the women are so damn hot here. I am loving it.

I finally got a good base to start with that looks more like Panzer Grey. So now thats out of the way I won't have 57 version per mod. So the PZIVF & PZIVF2 are final. I would recommend you get them or my PZIVG(early) & PZIVG(mid) as well as my upcoming mods will look out of place. Get them at the usual place http://www.cmmods.com/ Enjoy [ March 25, 2003, 04:02 AM: Message edited by: Shatter ]

I got in disregard my previous message

When I click the login I get the great 404 file not found error. I can DL for some reason with out being logged in, but I wanna upload a few mods, and with out logged in you cannot upload. Another weird thing is my password changes every couple of days and I have to have it sent via e-mail.

Holy crap I was just coming to the board for the exact same thing. I also must of tried at least 6 or 7 times with no luck. I also read the good thing about the 30.82 but they just won't work, I keep getting my current drivers installed after reboot. Foamy I tried to remove the drivers I curently have then install 30.82, but after reboot for unistal of current drivers. It Pc detects new hardware and automatically installs original drivers instead of 30.82. [ March 16, 2003, 06:54 PM: Message edited by: Shatter ]

Thanks for the kind words, I have been messing around with the colors a bit, and have come up with one I am happy with, every thing is still the same, but just a slightly less bit of blue to it. Yes I do have plans to do every last early tank and vehicle in this scheme. I have also been working on the later vehicles that I think everyone will like, but I am not gonna get to those until I have completed the early stuff. Thanks again

I just sent you an e-mail, let me know what you think. Green Hornet is on board any other out there up to it??? [ March 16, 2003, 03:18 AM: Message edited by: Shatter ]

What I am looking for is a couple full time mod testers for all my mods. Next thing is have you downloaded the 2 mods I have release so far??? If yest what do you think??? Are they to Blue, to light??? Can I contact you through e-mail regularly??? Do you have a cable modem or DSL to speed things along??? (Not so much a big deal if you don't mind long Downloads) Can your E-mail handle large files??? [ March 16, 2003, 01:46 AM: Message edited by: Shatter ]

It will be easy, all I need is somebody who can give me an oppinion. After looking at my mods, I just think they are too blue, which is an easy fix. But I could avoid these problems if somebody would test for me. Who is up to it???

One thing I would like to here from the people who are using my mods. I added less just to the PZIVF2 vs the PZIVF. I am bit new to dusting things up and I would like to here which you prefer more or less dust. Thanks Get it here http://www.cmmods.com/

This PC is a gateway, yes I did update it with a G4 Ti4600 & a new burner since the old one took a crap, but I had these problems before that. Really, the problems were there out of the box very very rare at first but lately its happening more and more. So did your problems

This is my older PC that I am having problems with. Pent4 1.4ghz 512 Rambius Ram 20gig HD Windows ME G4 128mb It has consistantly been having more problems. This PC I do all my modding on, so I need to fix the damn thing. 1. PC upon bootup (about 1/2 the time) has a program not responding, when I hit ctrl alt delete to close the program it locks up the pc. Program not responding varies, no one program is not responding all the time. 2. Upon bootup I often get a spool32 has cause error in spool32.exe. 3. Now tonight I was working on a mod and mouse goes nuts. I was in photoshop and the bmp started zooming in and out all on its own. I then minimized photoshop to go to device manager, mouse was showed no problems, updated drivers from Microsoft, so far no more problems there. I have been having the same bootup problems on this PC for a while, so a few weeks ago I reinstalled windows, and that did nothing problems still occur. I am not sure what to do now any thoughts??? [ March 14, 2003, 12:13 AM: Message edited by: Shatter ]

Well I got an e-mail that said I had a white line next to the turret port, so once again the mod has been updated. This is the final fix regardless. I can't believe I missed really. I just reloaded the whole mod, so jusst DL PZIVFv2 I am sure not many people have DL yet since I only uploaded a few hours ago. Sorry guys [ March 13, 2003, 04:36 AM: Message edited by: Shatter ]

Sorry guys while finishing up on my next mod, I realized there were some thing I just was not happy with about the PZIVF. Such as the front and rear hull was just off, compaired to the rest of the mod. So I fixed all that plus the hull mg and drivers port was faded so I reworked those from scratch as well as added quit a bit more detail to the whole mod. This will be the last update unless someone points out that is wrong with the mod. There was just to many changes to pratically every bmp to just do an update, so I v2 it. Don't worry the mod is very close to what I have before, but IMO better. Get it here http://www.cmmods.com/ [ March 12, 2003, 09:18 PM: Message edited by: Shatter ]

All the mods are pretty much done except for dust. I will probably just dust one up a day, and release one every day or so. I updated my PZIVF to PZIVFv2. Sorry I was working on another one today at work, and realized somethings needed to be reworked.