Jump to content
  • Announcements

    • Battlefront.com

      Special Upgrade 4 Tech Tips   12/27/2016

      Hi all! Now that Upgrade 4 is out and about in large quantities we have now discovered a few SNAFUs that happen out in the scary, real world that is home computing.  Fortunately the rate of problems is extremely small and so far most are easily worked around.  We've identified a few issues that have similar causes which we have clear instructions for work arounds here they are: 1.  CMRT Windows customers need to re-license their original key.  This is a result of improvements to the licensing system which CMBN, CMBS, and CMFB are already using.  To do this launch CMRT with the Upgrade and the first time enter your Engine 4 key.  Exit and then use the "Activate New Products" shortcut in your CMRT folder, then enter your Engine 3 license key.  That should do the trick. 2.  CMRT and CMBN MacOS customers have a similar situation as #2, however the "Activate New Products" is inside the Documents folder in their respective CM folders.  For CMBN you have to go through the process described above for each of your license keys.  There is no special order to follow. 3.  For CMBS and CMFB customers, you need to use the Activate New Products shortcut and enter your Upgrade 4 key.  If you launch the game and see a screen that says "LICENSE FAILURE: Base Game 4.0 is required." that is an indication you haven't yet gone through that procedure.  Provided you had a properly functioning copy before installing the Upgrade, that should be all you need to do.  If in the future you have to install from scratch on a new system you'll need to do the same procedure for both your original license key and your Upgrade 4.0 key. 4.  There's always a weird one and here it is.  A few Windows users are not getting "Activate New Products" shortcuts created during installation.  Apparently anti-virus software is preventing the installer from doing its job.  This might not be a problem right now, but it will prove to be an issue at some point in the future.  The solution is to create your own shortcut using the following steps: Disable your anti-virus software before you do anything. Go to your Desktop, right click on the Desktop itself, select NEW->SHORTCUT, use BROWSE to locate the CM EXE that you are trying to fix. The location is then written out. After it type in a single space and then paste this:

      -showui

      Click NEXT and give your new Shortcut a name (doesn't matter what). Confirm that and you're done. Double click on the new Shortcut and you should be prompted to license whatever it is you need to license. At this time we have not identified any issues that have not been worked around.  Let's hope it stays that way Steve
    • Battlefront.com

      Forum Reorganization   10/12/2017

      We've reorganized our Combat Mission Forums to reflect the fact that most of you are now running Engine 4 and that means you're all using the same basic code.  Because of that, there's no good reason to have the discussion about Combat Mission spread out over 5 separate sets of Forums.  There is now one General Discussion area with Tech Support and Scenario/Mod Tips sub forums.  The Family specific Tech Support Forums have been moved to a new CM2 Archives area and frozen in place. You might also notice we dropped the "x" from distinguishing between the first generation of CM games and the second.  The "x" was reluctantly adopted back in 2005 or so because at the time we had the original three CM games on European store shelves entitled CM1, CM2, and CM3 (CMBO, CMBB, and CMAK).  We didn't want to cause confusion so we added the "x".  Time has moved on and we have to, so the "x" is now gone from our public vocabulary as it has been from our private vocabulary for quite a while already.  Side note, Charles *NEVER* used the "x" so now we're all speaking the same language as him.  Which is important since he is the one programming them
Sign in to follow this  
dw

Upgrading to 4.0

Recommended Posts

I just purchased the 4.0 MacOS upgrade - big bundle and am about to update CMBN, CMFI, CMRT, and CMFB. I have all the adds-ons to all the games and have CMBN and CMFI up through version 3. 

I just want to check the process before beginning. It looks a though for each game I update, I start the game, then put in the code for the 4.0 upgrade, and then quit. I start the game activation script in the appropriate game documents subfolder and enter the registration code for each item. 

For CMRT and CMFB that seems pretty straight forward as there is only one license for each. For the other two I would like to check to see if I have this right:

CMFI - there would be 3 license keys - the base module, Gustav Line, and the 3.0 update. Is that correct and is there a specific order to put them in?

CMBN - there would be 7 license keys - the base module, Commonwealth Forces, Market Garden, 2.0 Update, 3.0 Update, Vehicle Pack, and Battle Pack. Is that correct and is there a specific order to put them in?

Thanks

Share this post


Link to post
Share on other sites
On 23.7.2017 at 9:06 PM, dw said:

I just purchased the 4.0 MacOS upgrade - big bundle and am about to update CMBN, CMFI, CMRT, and CMFB. I have all the adds-ons to all the games and have CMBN and CMFI up through version 3. 

I just want to check the process before beginning. It looks a though for each game I update, I start the game, then put in the code for the 4.0 upgrade, and then quit. I start the game activation script in the appropriate game documents subfolder and enter the registration code for each item. 

For CMRT and CMFB that seems pretty straight forward as there is only one license for each. For the other two I would like to check to see if I have this right:

CMFI - there would be 3 license keys - the base module, Gustav Line, and the 3.0 update. Is that correct and is there a specific order to put them in?

CMBN - there would be 7 license keys - the base module, Commonwealth Forces, Market Garden, 2.0 Update, 3.0 Update, Vehicle Pack, and Battle Pack. Is that correct and is there a specific order to put them in?

Thanks

I can't really speak for a Mac uodate, but

- for FI: I only needed to enter the 3.0 code and the GL code

- for BN: It is said to be similar. I.e., enter the 3.0 code and then the others. However, for me all modules were activated after entering 3.0 already.

In any case: You need to start with the 3.0 codes. Earlier codes will not be accepted.

Share this post


Link to post
Share on other sites

One last question before I install these - for CMFI and CMBN - after putting in the v4 upgrade code and the v3 upgrade code - do you need to put in the base module code? I realize all the add-in codes need to be entered - but don't know if the original base model code has to be put in.

Thanks 

Share this post


Link to post
Share on other sites
Sign in to follow this  

×